Same day despatch up to 3pm. Live stock levels. Available online or through your dealer. Contact us for phone or email support.

SWORKz S12-2M (Carpet) 1/10 2WD EP Off Road Racing Buggy Pro Kit

Product info:

Price £299.00 incl. VAT


SW-910033 SWORKz S12-2M (Carpet) 1/10 2WD EP Off Road Racing Buggy Pro Kit

Availability: Available to pre order from next batch

Awaiting delivery, our stockists may have availability


SWORKz S12-2M (Carpet) 1/10 2WD EP Off Road Racing Buggy Pro Kit

SW-910033 SWORKz S12-2M (Carpet) 1/10 2WD EP Off Road Racing Buggy Pro Kit

The SWORKz S12-2 1/10 2WD is designed for racing. The geometry of the car offers an optimized cornering speed paired with easy handling on carpet and very grippy tracks.
The S12-2 has a hard anodized and light aluminum T7075 chassis with a layout that allows up to 6 different battery positions. The flex of the chassis can be changed by adjusting the side guards.
The S12-2 comes with a 4mm carbon front shock mount and a completely redesigned front C-hub geometry. Adjustable Ackermann plate and carbon steering plates are also included in the kit. The S12-2 has new angled wishbones that offer a lower impact position resulting in a lower center of gravity.
The kit is equipped with a quick change system for the differential that can be mounted in 3 different positions. The rear wishbones are angled and the rear shock mount has different height positions. The weight of the gearbox has been optimized in a perfect ratio of size to strength.
The rear shock mount of the S12-2 is made of carbon. The wing holder can be used to adjust the height and angle of the wing. The rear width of the S12-2 can be changed through rear hubs and rear CVD modularity.
The SWORKz S12-2 is equipped with a front pendulum rod and a completely newly developed rear pendulum rod holder system.
The 2-pad slipper of the SWORKz S12-2 is supplied with hard anodized plates, high-temperature-resistant slipper pads and a spur gear guard with an engraved SWORKz logo.
The shock absorbers of the S12-2 are manufactured with the lowest possible tolerances. Housing and emulsion caps are hard-coated. The Teflon coating on the piston rods offers the smoothest surface you can imagine. Black Line nibs with a newly designed, anti-twist nib holder are also standard in the SWORKz S12-2 kit.
The new S12-2 body has been tested to achieve the best aerodynamic behavior.
When designing the vehicle, the SWORKz development team focused on using materials that meet the highest quality standards. The S12-2 kit only contains 100% SWORKz quality.

· Hard anodized and lightweight T7075 aluminum chassis
· Adjustable flex system with different side protection
· 6 different battery positions
· 4 mm carbon shock absorber mount
· New C-Hub geometry
· Interchangeable Ackerman plate
· Carbon steering plates
· Front pendulum rod
· Super light anodized front axles
· Front wing bracket
· Front aluminum wishbone mount
· Front wishbones in an angled design
· Easily adjustable Ackerman plate
· Differential Quick Change System
· Adjustable rear wing height
· Adjustable rear wing angle
· Rear width adjustable with hubs including length-adjustable CVD
· Fully adjustable square wishbone holder engraved with “SWORKz”
· Redesigned rear stabilizer bracket
· Rear wheel hexagon hard anodized
· Rear carbon shock tower
· Super light CAD optimized gear
· 2 pad slipper system with hard anodized plates
· High temperature resistant slipper pads
· Trace arm protection with laser logo
· Aluminum emulsion shock absorber caps
· Hard anodized shaft bolts
· Black feathers
· Anti-rotation penholder
· Hard-coated Teflon piston rods
· Hard-coated shock absorber housing
· 6-fold ball bearing servo system
· Quick release plate for electronics
· Battery pad included
· Balanced motor position
· Body with optimized aerodynamic design

Customers who bought this product also bought:


No products

VAT included £0.00
Shipping £0.00
Total £0.00

Prices include VAT