SWORKz S35-GT2.2 Factory Team Edition Nitro Power GT Pro Kit

** Available to special order - Please contact for price and availability **

SWORKz S35-GT2.2 Factory Team Edition Nitro Power GT Pro Kit

SW-910037F SWORKz S35-GT2.2 Factory Team Edition Nitro Power GT Pro Kit

The project of GT2.2 Factory Team Edition(FTE) is a special product for SWORKz GT worlds drivers to compete in the 2023 Australia IFMAR GT World Championships. The target is to be faster, lighter and easier driving performance.

The Car is designed with high quality aluminum bulk heads that can change diff positions. A Direct response steering servo savor with a new Ackerman system.

The latest S35-GT2.2 FTE series Lay Down Shock Tower System has a new suspension geometry to lay-down the shock positions. This is especially designed for high speed on road racing. Specially included options are the S35-GT2 front upper and lower ultra hard material arms. Also included are the latest S35-4 rear lower ABS arms (ultra hard material) that improves the GT2.2 FTE’s cornering speeds. A longer pipe holder spring that allows the pipe to sit closer to the body shell.

The 2-speed transmission has also been completely revised on the S35-GT2 platform that significantly improved compared to its predecessor.

The GT2.2 FTE comes standard with a new SWORKz Tornado GT 4-Shoes Clutch and Tornado GT 4-Shoes Aluminum Clutch Bell to get the maximum power from the engine to the transmission.

The S35-GT2 has a weight-optimized, hard anodized base chassis plate made of high-strength T7075 aluminum.

The HET differentials developed by SWORKz are also included with 13T pinion and 45T crowns in the kit.

The wishbone brackets, included with square inserts, allow the axle geometry of your SWORKz S35-GT2 to be adapted to any track layout. The front and rear CVD wishbones are made of a newly developed composite material. The side pans have also been redesigned.

The SWORKz S35-GT2.2 FTE has completely new rear knuckles made from composite materials combined with carbon plates that offers you the possibility for different setups.

There are many other changes and new ideas that were incorporated into the SWORKz S35-GT2.2 FTE that makes this car a real winner.

When designing the vehicle, the SWORKz development team focused on using materials that meet the highest quality standards. The S35-GT2.2 FTE kit is 100% SWORKz quality. Congratulations on purchasing the new SWORKz S35-GT2.2 FTE Pro kit and thank you for your trust in SWORKz.

Features:
•New Weight-optimized, Hard anodized T7075 base chassis plate
•New Front & Rear Shock Pro-composite Carbon Shock Towers
•New Aluminum Shock End Extension Holders
•Shock End Extension Holders with Pin-Screws
•New Front and Rear Adjustable Diff Position Design
•New Aluminum Front & Rear Diff Case Design
•New Aluminum Diff. Case Inserts
•New Aluminum Lower Arm Plates
•New Aluminum Front Upper Arm Holder
•New Front & Rear Aluminum Chassis Brace
•New Aluminum Ackerman Steering Plate
•New Aluminum Servo Savor Steering System
•New Steering Ball Studs
•New Steering Knuckle Plates
•Comes standard with Ultra Hard Arms Front & Rear
•Comes standard with Ultra Hard Upper Arms Front
•Multi-adjustable Sway Bar Linkage System for Front & Rear
•Comes standard with HET Over Drive Gears (45T/13T)
•2 Front Chassis Struts
•More balance weight positions
•Optimized composite T7075 aluminum parts
•Comes standard with Hard Material Center Spur Gears (58/62T)(Made in Italy)
•New Tornado GT 4-Shoes Clutch Kit New Tornado GT 4-Shoes Aluminum Clutch Bell

Specification:
Length：500mm
Width： 308mm
Height：145mm
Ground Clearance：15mm
Wheelbase：325-300mm
Track：F:306mm / R:308mm
Gear Ratio: C:58/62,19/24T, F/R:45/13T
Weight：Kit weight 3070g (Full equipment with fuel, without Tires and Body Shell)

Required to complete:
Radio equipment, reciever battery, 3.5cc nitro engine, tuned pipe, servo, nitro starting accessories, starter box, fuel, bodyshell, wheels & tyres.