SWORKz S35-4 EVO 1/8 Pro Nitro Buggy Kit

SW910041

SW-910041 SWORKz S35-4 EVO 1/8 Pro Nitro Buggy Kit.

More details

£698.40 incl. VAT

In Stock - ready to Ship

    SWORKz S35-4 EVO 1/8 Pro Nitro Buggy Kit

    SW-910041 SWORKz S35-4 EVO 1/8 Pro Nitro Buggy Kit

    Further continuing with the successful SWORKz S35-4 1/8 Nitro Buggy platform, the latest S35-4 EVO is designed for an even higher level of racing as the car further evolves in development.

    The included geometry from the worlds edition conversion kit provides optimized cornering speeds along with a more easy handling feel and maximizing traction. The S35-4 EVO features a T7075 hard anodized and lightened aluminium chassis with a new short wheel base design that was tested for a long time by our factory pilots, which guarantees the best speed and balance for both front and rear suspensions. The HET differentials are included in the kit as standard, while the High Density Clutch Bell system is optional. The new S35-4 EVO comes with a brand new steering lay-down type steering bell crank servo saver system, this new ackerman design provides the driver with better control and feel over the S35-4 EVO buggy.

    The SWORKz S35-4 EVO also includes the latest Arched-Bridge-System and the higher capacity shock system, this is a big step for S35-4 EVO as it provides better stability to the buggy overall, especially on bumpier more blown out surfaces. As part of the shock package, also included are the special BBS pistons and oil seal parts which are precision made and developed and tested by SWORKz team drivers during the worlds in 2022. Also included are specially made durable material parts for the suspension, such as the suspension inserts which our team drivers prefer and immediately felt more confident with.

    There are many more small changes and ideas in the new SWORKz S35-4 EVO, all of which contribute to a notable evolutionary step that the whole team have contributed and developed with to make the S35-4 EVO better than ever. The secret of a modern racing car is the possibility to adapt the car setup to every track for top pilots, but also have a standard setup that works on most tracks for hobby pilots. The SWORKz S35-4 EVO fulfils these two characteristics and we can't wait for you to try it and appreciate this for yourself.

    S35-4 EVO Kit Features:

    T7075 Hard Anodized, Lightend Aluminium Chassis (New)
    Short Chassis Design (New)
    Higher Shock Towers (New)
    Longer Shock Bodies (New)
    Shorter Shock Shafts
    S35 Series BBS System Hex-Cell Shock (New)
    Shorter Front Shock Springs
    SWORKz 1/8 BBS Precision Plastic Shock Piston (New)
    Fixed Shock Spring Holder
    3mm Updated Rear Shock Studs
    Ackerman Plate (New)
    Steering System (New)
    Servo Saver Aluminium Part (New)
    Servo Saver Plate (New)
    Servo Saver Post Locking Design (New)
    Steering Ball Studs (New)
    Steering Knuckle Plates (New)
    Updated Toe In Plates with Square Inserts (New)
    Aluminum Intensity F/F and R/F Narrow Lower Suspension Plate (New)
    New Carbon Center Diff Plate with Throttle Servo Linkage System (New)
    Nitro Series Center Brake Disk Holder (New)
    Lightweight Wing Mount
    SWORKz S35-4 Series Arched-Bridge-System Rear Lower Arm Set (New)
    Composite Rear Hubs with Carbon Plates
    Multi Adjustable Ball System for Rear Upper Arms
    Anticlock Screws for Shocks
    Aerodinamically Optimized Body Shell
    3 HET Differentials Included
    2 Front Chassis Braces Included
    Black Competition Shock Springs Included
    Adjustable Wing Position
    Adjustable Wing Angle
    More Balance Weight Positions
    Stronger Downstop Area
    Optimized Composite Material
    Aluminium Parts in T7075