No products
Prices are tax included
SWORKz S35-T2E 1/8 BL Power Truggy Pro Kit - Special Order
SW910040
SW-910040 SWORKz S35-T2E 1/8 BL Power Truggy Pro Kit
** Available to special order - Estimated leadtime 1-2 weeks. Please contact for further information. **
SWORKz S35-T2E 1/8 BL Power Truggy Pro Kit
SW-910040 SWORKz S35-T2E 1/8 BL Power Truggy Pro Kit
The SWORKz S35-T2e 1/8 Electric Truggy is designed for pure racing, geometry of the car provides great corner speed with exceptional traction and easy driving control.
The S35-T2e features a T7075 hard anodized and lightened aluminum wide layout chassis that was tested by our factory pilots to guarantee best performance. Newly developed Truggy HET differentials are included and provide traction that was not possible before.
The new S35-T2e comes with a longer shock layout in the front and rear, construction of the shocks is adapted to that new optimized layout. The smart holder for shock spring plates makes it almost impossible to lose them anymore.
Steering geometry, with new Ackerman and steering plates, gives the driver a feeling of total control over the SWORKz S35-T2e.
With the new toe-in plates, which now contain square inserts, you can adjust the geometry of your SWORKz S35-T2e to fit every track layout and track condition. The lower arms are made of a newly developed composite material and fit perfectly to the new chassis. Side guards were redesigned as well.
With the new lightened wing support you can adjust various positions and the angle of the wing to give your SWORKz S35-T2e the best stability on the track. Together with the “Speed Rhinoceros III” body shell, perfect aerodynamics is achieved.
Another new development in our SWORKz S35-T2e is the totally new rear hub. Made from composite materials combined with 2 carbon plates gives you the possibility for various setups.
A new designed Motor mount makes it possible to change the motor or adjust the play of the gears very easily. There are many changes and smart ideas put into your new SWORKz S35-T2e that makes the car a real winner.
The secret of a modern racing car is the possibility to adapt the setup to every track for top pilots but also have a standard setup that works on most tracks for hobby pilots. The SWORKz S35-T2e represents these two characteristics in perfection.
The SWORKz development team focused on using materials corresponding to the highest quality standards when designing the car. You will find only 100% SWORKz quality in the S35-T2e kit.
Please note this is a Pro kit and will require Radio gear, Servo, Motor and Speedo to complete the build.
S35-T2e Kit Features
· New T7075 Hard Anodized, Lightend Aluminium Chassis · New Wide Chassis Design
· New Design Shock Towers · New Shock Caps
· New Fixed Shock Spring Holder · New 3mm Updated Rear Shock Studs
. New Ackerman Plate · New Steering System
. New Servo Saver Aluminium Part · New Servo Saver Fixable Nut
. New Servo Saver Plate · New Servo Saver Post Locking Design
. New Steering Balls . New Steering Knuckle Plates
· New Updated Toe-In Plates with Square Inserts · New Lightweight Wing Mount
· New Side Guards · New Lower Front and Rear Arms
· New Front Upper Arms · New Body Posts Front and Rear
· New Composite Rear Hubs with Carbon Plates · Adjustable Wing Position
· New Anticlock Screws for Shocks · New Easy Change Motor Mounting Plate
· 3 HET Differentials Included · 3 HET Differentials Included
· Black Competition Shock Springs Included · 2 Front Chassis Braces Included
· New Multi Adjustable Ball System for Rear Upper Arms · Adjustable Wing Angle
Specification:
Length: 560mm
Width: 410mm
Height: 230mm
Ground Clearance: 80mm
Wheelbase: 375-380mm
Track: F:366mm /R368mm
Gear Ratio: C:48/13T, F/R 46/10T
Weight: 4230g (Race condition)
