REDS 721 Superveloce Gen5

ENBU0043 REDS 721 Superveloce Gen5

More details

£442.82 incl. VAT

  • Not Included
  • Included (+£30)

Awaiting delivery, our stockists may have availability

    REDS 721 Superveloce Gen5

    ENBU0043 REDS 721 Superveloce Gen5

    REDS Racing is proud to introduce the 721 Superveloce™ GEN5, the most refined evolution of the Superveloce platform.

    The GEN5 is the result of targeted development on internal fluid dynamics, crankshaft and cylinder timing, and the introduction of the new 9 mm carburetor, with a clear objective: increase power without increasing fuel consumption.

    Performance is higher, while fuel mileage remains exactly the same as the original Superveloce, a long-time benchmark for efficiency.

    Key GEN5 Technical Improvements:

    Optimized Internal Fluid Dynamics.
    Reworked internal flow paths improve air–fuel mixture quality and combustion stability. The result is smoother power delivery, faster throttle response, and extremely consistent performance over long runs.

    Revised Crankshaft & Cylinder Timing
    Both crankshaft and port timing have been redesigned and optimized to: Increase mid and high-RPM performance. Deliver stronger top-end power. Maintain excellent drivability. Keep fuel consumption unchanged compared to the original Superveloce More performance, same fuel mileage.

    New 9mm Carburetor
    The GEN5 introduces a new carburetor with 9 mm bore, designed to: Increase overall engine performance, Make tuning easier and more stable, Offer a wider and more forgiving carburetion window In practice, the engine is noticeably easier to set up and tune. Performance can be further optimized using larger venturi options, up to 8.5 or 9.0 mm, depending on track layout and conditions.

    One Engine, Two Classes
    The 721 Superveloce GEN5 is designed to cover both Buggy and Truggy applications with a single engine platform, simplifying choices for racers competing in multiple classes.

    Full DLC Configuration:
    crankshaft and backplate The 721 Superveloce GEN5 returns to a full DLC setup, featuring the Black Diamond DLC crankshaft combined with a traditional DLC backplate.
    This solution guarantees excellent reliability, reduced friction, and more controlled costs, without compromising performance. The traditional DLC backplate has proven to be extremely robust and consistent in all racing conditions. The RTX backplate remains an excellent optional upgrade for racers looking for a different power delivery feel or further fine-tuning, depending on track layout and driving style.

    Technical Specification:

    FeatureDetails
    Category1/8 Buggy
    Displacement [cm³]3.5
    Bore [mm]16.2
    Stroke [mm]16.8
    Inlet Ports7
    Outlet Ports1
    Front Bearing7x19x6 Double Seal
    Rear Bearing14x25.4x6 – 9 Balls High-Durability Ceramic
    Carburetor Diameter [mm]7.0 (Options: 6.0, 6.5, 7.5, 8.0) Carburetor body 9.0 mm
    Carburetor TypeVCX3-A AluminIum Short Needle
    Fuel16% Nitro
    Weight [g]345
    Fuel Consumption [min]> 9
    Operating Temperature [°C]110–130
    Available as supplied from manufacturer, or including break-in using our state of the art electronic oil filled bath. Please note, this may be subject to a 24hr delay whilst the engine is broken-in for you.

Accessories